Updated November 2026
A Muddy Legend XLT 2 man tree stand gives two hunters a stable, elevated platform for deer season. This guide walks you through choosing a tree, assembling and hanging the stand, and staying safe while you climb and hunt. Follow the steps in order and do not skip the safety checks.
Check the Stand and Gather Your Tools
Before you head to the woods, inspect every component. Look for cracked welds, bent tubing, worn straps and missing hardware. Manufacturers specify weight limits for their stands, so confirm the combined weight of both hunters and gear falls within the rated capacity. If any part is damaged, replace it rather than hunting from it.
Shopping for one? See our guide: 6 Best Muddy Tree Stand Safety Harness Options for Deer Hunters (2026).
- Stand sections, seat and platform
- Climbing sticks or straps as specified for your model
- Full-body fall arrest harness and lineman’s rope or lifeline
- Pull-up rope and carabiners
- Hand saw or pruning tool for clearing branches
- Wrench or socket set for the included hardware
Choose the Right Tree and Stand Location
Pick a live tree that is at least 8 to 10 inches in diameter at the height where the stand will sit. Make sure the trunk is straight and free of dead limbs, rot or cracks. Plan your shooting lanes before you hang anything, and set the stand within about 15 to 20 yards of expected deer travel. For help with spot selection, see View From Tree Stand: How to Pick the Best Spot for Deer (2026).
Assemble and Hang the Two-Person Stand
Assemble the platform and seat on the ground first, tightening all bolts until snug. Then raise the stand to the desired height using the climbing method your model calls for, keeping both hunters tethered at all times.
- Clear branches within reach of the stand and along your climbing path.
- Attach the stand to the trunk at the height you want, keeping the platform level.
- Strap the stand tight so it does not shift or rock when weight is applied.
- Test by standing on the platform gradually, checking for movement or creaking.
- Re-check every strap and bolt after the first few hours in the stand and again before each hunt.
For a broader look at climbing-style stands and setup habits, read Ol Man Climber Tree Stand: Setup, Safety and Buying Guide for Deer Hunters.
Use Fall Protection Every Time You Climb
Wear a full-body harness whenever you are off the ground, and clip in before you leave the ground. Keep your lifeline attached from the moment you start climbing until you descend. Never hang a stand without a harness-compatible lifeline, and never climb with a loose or unclipped line. A fall from a tree stand is one of the most serious injuries a hunter can suffer, so take this step seriously. Consult a professional or the manufacturer if you are unsure how to rig your system.
Harness Considerations
Choose a harness designed for tree work, with adjustable leg straps and a dorsal D-ring. Check it for fraying or stitching damage before each season, and replace it if it has been involved in a fall.
Recommended gear
- Full-body fall arrest harness: A harness rated for tree stand use keeps you supported if you slip while climbing or hunting. View on Amazon
- Lineman’s rope: A climbing line lets you ascend and stay connected to the tree at height. View on Amazon
- Hand pruning saw: Clearing small limbs makes setup and shooting lanes safer and quieter. View on Amazon
Common Mistakes to Avoid
- Hanging the stand too high, which increases fall distance and makes accurate shooting harder.
- Skipping the harness on short climbs or while “just getting in.”
- Failing to re-tighten straps and bolts after the first use.
- Exceeding the stated weight capacity when two hunters and gear share the platform.
- Hanging a stand on a tree that is dead, leaning or too small in diameter.
FAQ
How high should a Muddy Legend XLT 2 man tree stand be hung?
Most hunters set the platform between 12 and 20 feet, depending on terrain and cover. Stay within the height range your manufacturer specifies for the model.
Do both hunters need a harness?
Yes. Each hunter should wear a full-body harness and stay clipped in whenever climbing or sitting in the stand.
How often should I inspect the stand?
Inspect it before every season and check straps and bolts before each hunt. Replace any part that shows cracks, rust or excessive wear.
Conclusion
A properly set up Muddy Legend XLT 2 man tree stand gives you a stable, quiet platform for two hunters. Choose a healthy tree, hang the stand securely and wear fall protection every time you climb. Check your gear before each season, and your stand will serve you well for years.

