Updated November 2026
The Bushnell Yardage Pro 400 rangefinder gives you a fast, accurate distance reading to a deer, turkey or stand location. This guide walks you through the basic setup, how to take a clean reading, and how to handle angled shots so your yardage holds up in the field. Read it before opening day and you will know exactly what the display is telling you.
Set Up the Yardage Pro 400 Before the Season
Start by reading the owner’s manual that came with the unit, since button layouts and menu options can differ between model revisions. Install the battery and confirm the display powers on. Check that the unit is set to the units you plan to use, typically yards for most US hunters.
Shopping for one? See our guide: Bushnell Tour V2 Rangefinder Review: Pros and Cons.
Next, look through the eyepiece and focus the reticle on a fixed target at a known distance, such as a fence post or a marked range spot. Adjust the diopter until the display is crisp. Doing this in your hunting clothes and gloves, if you normally wear them, keeps your setup repeatable.
Checklist before you head out
- Fresh battery, plus a spare if you hunt cold weather.
- Lens cloth and a clean eyepiece.
- Known-distance targets to verify accuracy on the range.
- A lanyard or strap so the unit does not drop from your neck or pack.
Take Accurate Distance Readings in the Field
Hold the unit steady with both hands or brace it against a tree or your shooting rest. Aim at the target you actually plan to shoot, not the brush in front of it. Press the measure button and hold still until the reading locks.
Watch for interference. Tall grass, small branches and leaves between you and the animal can cause the unit to return a shorter distance than the target. If the reading looks much shorter than what your eye estimates, take a second reading on a more open line of sight.
Use Angle Compensation for Elevated and Downhill Shots
Steep terrain changes the number that matters. A rangefinder reports the straight-line distance to the target, but your bullet or arrow travels a path shaped by the angle, so the holdover you need depends on the slope. Many hunters use the reading together with a ballistic chart or the manufacturer’s hold guidance, and they confirm the correct approach in the manual for their specific model.
For tree stand hunters, practice shots from your stand height at known distances. Spend time at the angles you will actually face, such as a 20-foot stand overlooking a field edge. Take several readings from the stand to each marker and note the results.
Common Mistakes
- Ranging the nearest branch or grass tuft instead of the animal.
- Shaking while pressing the button, which produces inconsistent numbers.
- Skipping a range check after a battery change or a drop.
- Ignoring steep angles and assuming the displayed number is all you need.
- Forgetting that cold temperatures can drain batteries faster than expected.
Recommended gear
A spare CR2 lithium battery keeps the unit ready through a long cold morning in the stand. View on Amazon
A lanyard or chest harness keeps the rangefinder within reach when you are climbing or moving through brush. View on Amazon
A lens cleaning kit helps keep the eyepiece and objective lens free of dust and moisture before the morning shot. View on Amazon
If you are comparing this model with other hunting-style units, the internal guides on this site cover related setups, such as Bushnell Scout 1000 Arc Rangefinder: How to Use It for Hunting (Setup and Tips) and Nikon Forestry Pro Laser Rangefinder: A Practical Guide (2026). For a broader look at how rangefinder features compare, see Shot Scope Pro L2 Laser Rangefinder: Setup, Use and Tips for Hunters.
FAQ
Can the Bushnell Yardage Pro 400 rangefinder range animals in low light?
Many laser rangefinders work at dawn and dusk, but the displayed reading can be harder to see and the unit may take longer to lock on. Check the manual for the stated operating conditions and test the unit before the season.
How often should I check the accuracy of my rangefinder?
Check it at the start of the season, after any drop, and after a battery change. Use targets at known distances to confirm the readings are consistent.
Do I need to adjust my shot for angle when using this rangefinder?
Yes, when shooting steeply up or down, the correct holdover can differ from the straight-line reading. Confirm the approach that fits your weapon and check with a professional or your ballistic chart if you are unsure.
Conclusion
With the Bushnell Yardage Pro 400 rangefinder set up correctly and checked on known targets, you can trust its readings in the field. Take steady, clean measurements on the animal itself, and account for steep angles before you shoot. Practice these steps before the season so they feel automatic when the moment comes.

