Updated November 2026
The reveal trail camera solar panel is a practical accessory for hunters who run cellular Tactacam Reveal cameras at remote sites where battery swaps are a hassle. It suits people who leave cameras out for weeks and want to keep them charged without a trip into the woods. It is less useful for hunters who check cards every few days at a site close to home, or whose camera sits in heavy shade for most of the day.
Product Overview
This is a solar panel listed by TACTACAM as compatible with several Reveal camera generations, including the X 2.0, X, Gen 1, SK and XB models. It connects to the camera and supplements or replaces battery power so the unit can run longer between service visits. Manufacturers position it as a way to reduce battery changes in the field.
Key Features
- Designed for TACTACAM Reveal cellular trail cameras, including the X 2.0, X, Gen 1, SK and XB listings.
- Provides solar charging to supplement camera power during daylight hours.
- Intended for remote and long-duration setups where frequent battery changes are impractical.
Pros & Cons
Pros
- Reduces how often you need to visit a site to swap batteries.
- Matches the Reveal camera line, so it is built for these specific cameras rather than a generic charger.
- Useful for cellular setups that draw more power than basic cameras.
Cons
- Solar output depends on sun exposure, so heavily shaded timber sites may see little benefit.
- Owners often report that panel placement and angle take some trial and error to get right.
Who Should Buy This Product?
Buy this if you already run a compatible Reveal camera at a site you visit only every few weeks and you can mount a panel in open sunlight facing south in the Northern Hemisphere. Skip it if your camera is in dense canopy, if you visit often enough that batteries are not a concern, or if your model is not on the compatibility list.
Alternatives
TACTACAM Reveal X Gen 3.0 Cellular Trail Camera – Multi Carrier, HD Photos & Videos, Pre-Installed Antenna, Built-in GPS, Best Battery Life, Low-Glow IR Flash, Fast Trigger Speed + Reveal Solar Panel
The TACTACAM Reveal X Gen 3.0 is a complete cellular camera bundled with a solar panel, a good choice if you are starting from scratch. View on Amazon
TACTACAM Reveal Pro 3.0 Cellular Trail Camera – Multi-Cellular Network, No-Glow IR, Wi-Fi Enabled, HD Photos & 1080p Videos, Long Battery Life + Solar Panel, Lipo Lithium Battery Pack, & 32GB SD Card
The TACTACAM Reveal Pro 3.0 pairs a no-glow IR camera with a solar panel, lithium battery pack and SD card for a more complete remote setup. View on Amazon
FAQ
Will this panel work with my Reveal camera model?
The listing names the X 2.0, X, Gen 1, SK and XB Reveal models. Check your camera’s model name against that list before buying, since compatibility is model-specific.
How much sun does the panel need?
Solar panels perform best with direct sun for most of the day. Place it in an open area, avoid overhanging branches, and angle it toward the sun path for your region. Shaded sites will charge slowly or not at all.
Can a solar panel replace batteries entirely?
In many setups it reduces battery changes rather than eliminating them. Keep spare batteries on hand for cloudy stretches or winter months with short days, and consult the camera manual for recommended power practices.
Final Verdict
The reveal trail camera solar panel is a worthwhile add-on for hunters running a compatible Reveal camera at remote, sunny locations where frequent battery changes are a burden. Shaded or easily reached sites will get less value from it. Confirm your model is on the compatibility list before you buy.
Related reading
- Moultrie Trail Camera Solar Panel: Setup and Buying Tips for Hunters
- Tactacam Reveal X Gen 3.0 Cellular Trail Camera: Setup Steps for Hunters
- Tactacam Reveal X 3.0 Cellular Trail Camera: Setup, Plan and Tips for Hunters
- Tactacam Reveal Ultra Cellular Trail Camera Review: Key Features Explained
- Reveal Ultra Trail Camera Review: Is It Worth It?


