Greylight 6 Premium Hunting Blind Tower: Setup, Features and Buyer’s Guide

By Wyatt Hayes

Updated November 2026

The greylight 6 premium hunting blind tower is a tall, enclosed ground blind designed to give deer hunters a stable, concealed shooting position. In this guide, you will learn what the greylight 6 premium hunting blind tower is built for, how to decide whether it fits your hunting setup, how to set it up and place it correctly, and which mistakes to avoid once it is in the woods. Because specifications vary by production run and dealer listing, always confirm dimensions and included parts against the manufacturer’s current documentation before you commit.

What the greylight 6 Premium Hunting Blind Tower Is Designed to Do

Tower-style blinds sit above the ground on a metal frame, which lifts the hunter above the typical line of sight of deer moving through brush and along trails. A premium tower in this category usually adds a fully enclosed cab, shooting windows, and a platform that keeps you off the ground scent and out of the wind’s immediate path. Before buying any blind labeled as a premium hunting blind tower, check whether the manufacturer describes it as a ground-level or elevated unit, since that changes how you plan transport and setup.

The main job of a blind like this is concealment and stability. Deer have very good peripheral vision and excellent sensitivity to movement, so the best blind is one that breaks up your outline and lets you draw without shifting your whole body. If you are new to tower blinds, it helps to read a broader overview of setup approaches first, such as the step-by-step notes in Pop-Up Ground Hunting Blind: How to Pick and Set One Up Right, to understand where a tower differs from a pop-up.

Step 1: Confirm the Blind Fits Your Hunting Situation

Before you think about setup, decide whether a tower blind is the right tool for your property. Towers suit hunters who sit the same stand for several weeks, have access to a fixed food plot or travel corridor, and can get equipment onto the site with a vehicle or ATV. They are less practical for public land hunts where you hike in, and they are harder to relocate in a single afternoon.

• Will you hunt the same location for most of the season?
• Can you transport sections of the frame by truck or utility vehicle?
• Do you need to hunt with a bow, crossbow, or rifle, and does the window layout accommodate that?
• Do you plan to add accessories such as a seat, heater, or window inserts?

If you plan to hunt a wide range of setups, compare the tower against other styles. The guide 7 Best Guide Gear 2-Man Universal Tower Hunting Blind Options (2026) covers how tower blinds of this size compare in practice, which helps you decide whether a six-foot-class tower or a larger two-person unit better matches your needs.

Step 2: Choose and Prepare the Ground

Site selection matters as much as the blind itself. A tower in an open field is far easier for deer to spot than one tucked into a treeline, so choose a location that uses existing cover on at least two sides. Level ground makes the frame easier to square and reduces the chance of wobble when you shift in the seat.

Clear the Footprint

Remove sticks, rocks, and high grass from the area where the legs will sit. Leave the surrounding brush in place where possible, since natural cover is one of the best concealment tools you have. If you need to trim, cut branches back only enough to clear shooting lanes.

Check for Level and Firm Footing

Use a carpenter’s level on a straight board across the leg footprint. If the ground slopes more than a few degrees, dig out the high leg a little or add a shim plate designed for the purpose. Soft soil should be tamped down, and you may want to place flat pads under the feet to spread the load.

Step 3: Assemble the Frame Safely

Assembly is easiest with two people. Lay out every component before you start, check the parts against the manufacturer’s list, and read the instructions completely before you lift anything.

1. Assemble the leg sections and attach them to the base or cross-members loosely, without fully tightening.
2. Raise the frame into position and square it, measuring diagonals corner to corner until they match.
3. Install the platform or floor section and confirm it sits flat across all supports.
4. Attach the cab walls, starting with the rear and working forward, so the structure stays rigid.
5. Tighten all fasteners in a cross pattern, then do a final check of every joint.
6. Attach the ladder or steps and test each rung or tread under load before climbing.

Never climb the blind until every connection is tight and the frame has been tested by pushing firmly on each corner. A tower that moves noticeably when you shift weight is not ready for use, and a fall from height can cause serious injury. If you are unsure about structural assembly, consider having an experienced hunting partner or a dealer technician check your work.

Step 4: Set Up Windows and Concealment

Once the frame is solid, focus on the parts that actually keep you hidden. Window placement and material decide how much light and movement reach deer. If your model uses window inserts, make sure they are seated fully and that no gaps remain at the edges.

For window choices and installation details that apply across many blind designs, the guide Window for Hunting Blind: How to Choose and Install the Right One explains how to match a window to your shooting angles and weather exposure.

Step 5: Plan Your Approach and Entry

Your access route can give away a blind faster than anything else. Walk in and out along the same path every time, ideally downwind of your expected deer approach. Avoid trampling new trails through the cover and keep foot traffic off the trail the deer are using.

• Plan entry and exit routes before the season opens, and mark them with minimal flagging you remove later.
• Carry a small bag for trimmed brush and debris rather than leaving it at the base.
• Wear clothing that matches the season and the local cover, and keep scent control in mind when you climb.
• Give the site time to settle after setup, ideally a few days, so deer grow accustomed to the new structure.

Step 6: Hunt From the Blind Effectively

Once you are inside, your movement matters most. Arrive early, settle in before shooting light, and keep your motions slow. Deer that come into view will often stop and scan, so wait until you have a clear and safe shot before raising your weapon. Use the window closest to the approaching animal, and keep your rifle or bow muzzle pointed toward open lanes while you wait.

Track which windows deer use most and adjust your plan over the season. A tower gives you a commanding view, but it also means deer can see you once they get close to the base. Keep the cab interior dark, use seat cushions that do not squeak, and avoid bright lights after dark.

Recommended gear

A few supporting items can make the greylight 6 premium hunting blind tower easier to set up and more comfortable to use over long sits.

• Carpenter’s level and shim set: Helps you square the frame and correct slope before you climb. Choose a level with a true bubble vial and a straight edge long enough to span the leg footprint. View on Amazon
• Cordless impact driver: Speeds up tightening of frame bolts and reduces the chance of cross-threading compared with hand tools. View on Amazon
• Ground-level window mesh covers: Lets you keep windows covered during daylight movement while still allowing a clear view when you open them. View on Amazon
• Hunting blind seat cushion: Reduces noise and fidgeting during long sits in an elevated cab. View on Amazon

Common mistakes

• Building on uneven ground: A tilted frame leads to rattling, wobbles, and unstable shots. Level the site first.
• Skipping the diagonal check: A frame that looks square may be racked. Measure corner to corner before fully tightening.
• Setting up too close to a trail: Deer often see new structures at close range. Give yourself enough distance to keep the blind in cover.
• Opening every window at once: Multiple open windows increase movement visible from outside. Open only the lane you need.
• Climbing before a full load test: Always push each corner and test the ladder before climbing. Rushing this step is one of the most common causes of accidents.
• Ignoring wind direction: Setup and entry routes should keep your scent away from primary approach paths.

Tips for a Better Season

• Pre-scout entry routes and place your stand at least a few days before opening day.
• Keep a repair kit and spare fasteners on site so small problems do not force an early exit.
• Inspect the frame after windy weather or heavy snow, and retighten any joints that have loosened.
• Store the blind’s window covers and cushions indoors during the off-season to extend their life.

FAQ

Can one person set up the greylight 6 premium hunting blind tower?

Many hunters prefer two people for the frame and cab, especially when lifting sections and squaring the structure. Single-person setup is possible if you use a level base, a stable work platform, and careful sequencing. Always check the manufacturer’s assembly instructions for the recommended number of people.

Do I need to level the ground before setting up a tower blind?

Yes. A level base keeps the frame square, reduces wobble, and makes shots more stable. Use a level and shims to correct small slopes before you assemble.

How do I keep deer from seeing the blind?

Use natural cover around the base, keep the interior dark, open only the window you need, and avoid moving quickly inside the cab. Setting the blind in existing brush or along a tree line helps break up its outline.

Should I cover the windows when I am not shooting?

Generally, yes. Keeping mesh or tinted covers closed while you wait reduces movement and light visible from outside. Open the window just before a deer enters your shooting zone.

How often should I inspect the blind during hunting season?

Check it before the season, after each major weather event, and periodically through the season. Look for loose bolts, cracked welds, worn ladder rungs, and any soft spots in the ground beneath the legs.

Can I leave the blind up all season?

Many hunters leave a tower in place through the season, but check local regulations on how long structures can remain on public or leased land. On private land, confirm with the landowner and keep the site clean.

Is a tower blind safe in high winds?

Elevated structures are more exposed to wind. Anchor the frame according to the manufacturer’s guidance, secure window covers, and avoid hunting from the blind during severe weather. Consult the manufacturer or a qualified professional if you are unsure about anchoring for your site.

Conclusion

The greylight 6 premium hunting blind tower can give you a stable, concealed position for a full season when it is sited, assembled, and used correctly. Focus on level, firm ground, a fully tested frame, and window setups that match your primary shooting lanes. Careful planning around entry routes and movement inside the cab will do as much for your success as the blind itself.

Related reading

• Used Hunting Blind for Sale: How to Buy One Safely and Get a Good Deal
• Tractor Supply Hunting Blind?
• Top 9 Sportsman's Condo Ridgeline Hunting Blinds: Buyer's Guide

About Wyatt Hayes

Wyatt writes about hunting. Each guide starts with research into how products are built and what owners report after months of use, and is revised when better options appear.