Updated November 2026

Looking for replacement tree stand cables that fit a hang-on or platform stand without a lot of guesswork? This pair of PVC-coated steel cables is aimed at hunters who need a straightforward swap for worn or frayed lines. It suits anyone with a compatible stand who wants a rust-resistant, 2-pack replacement. Hunters running a climbing stand with a different cable layout, or anyone who needs a very specific length, should check fit carefully or skip it.

PVC Coated Steel Cable,Rust-Resistant Zinc-Plated Thermoplastic-Sealed 3/8" Hole Ends for Replacement Hang on Tree Stand Platform Tree Stand Cables 3/16In 2 Pack 2000 LBS Max Load

PVC Coated Steel Cable,Rust-Resistant Zinc-Plated Thermoplastic-Sealed 3/8" Hole Ends for Replacement Hang on Tree Stand Platform Tree Stand Cables 3/16In 2 Pack 2000 LBS Max Load

View on Amazon

Product Overview

This is a two-pack of 3/16-inch PVC-coated steel cables sold as replacement cables for hang-on and platform tree stands. The listing describes zinc-plated steel with thermoplastic-sealed ends set into 3/8-inch hole ends. Manufacturers specify a 2000 lb maximum load for the cable set, so it is aimed at general stand replacement rather than a specialty application.

Key Features

  • PVC-coated steel construction for a protective outer layer
  • Zinc-plated, rust-resistant finish
  • Thermoplastic-sealed ends with 3/8-inch hole ends
  • 3/16-inch cable diameter, sold as a 2-pack
  • Listed maximum load of 2000 lbs

Pros & Cons

Pros

  • Coated steel with a zinc-plated finish suited to outdoor exposure
  • Sold as a matched pair, so both sides can be replaced together
  • Listed load rating is well above typical stand weight plus hunter weight

Cons

  • Fit depends on your stand’s hole spacing and end hardware, so confirm compatibility before buying
  • Owners often report that the coating can be scuffed during installation, so handle carefully

Who Should Buy This Product?

This set fits hunters who already know their stand’s cable length and end style and need a direct replacement. It is a practical choice for a stand that has worn or rusted cables but is otherwise sound. Anyone unsure of their stand model should measure the existing cables first, as fit is the main point of failure for replacement lines.

Alternatives

Another pair of replacement cables for climbing treestands, sold as 2 pieces with a black PVC-coated braided steel construction and a listed 65-inch length, is a good option if your stand uses that length.

Replacement Tree Stand Cables,Pair of Replacement Cables for Climbing Treestands, 2PCS Hunting Tree Stand Accessories,Durable Steal Braded PVC Black Coated 65" Treestand Replacement Cables

Replacement Tree Stand Cables,Pair of Replacement Cables for Climbing Treestands, 2PCS Hunting Tree Stand Accessories,Durable Steal Braded PVC Black Coated 65" Treestand Replacement Cables

View on Amazon

View on Amazon

A UIIHUNT-branded pair of replacement cables for climbing treestands, listed with durable braided steel and a black PVC coating in a 65-inch length, is worth comparing if you want a similar spec from a different brand.

UIIHUNT Replacement Tree Stand Cables: Pair of Replacement Cables for Climbing Treestand, Durable Steel Braded PVC Black Coated 65" Treestand Replacement Cables, Hunting Tree Stand Accessories

UIIHUNT Replacement Tree Stand Cables: Pair of Replacement Cables for Climbing Treestand, Durable Steel Braded PVC Black Coated 65" Treestand Replacement Cables, Hunting Tree Stand Accessories

View on Amazon

View on Amazon

FAQ

How do I know if replacement tree stand cables will fit my stand?

Measure your existing cables and note the end style, hole size and spacing on your stand. Compare those measurements with the listing before ordering. If you are unsure, check your stand’s manual or contact the manufacturer for the correct cable spec.

How often should tree stand cables be replaced?

Inspect cables before every season and after any heavy use. Replace them if you see fraying, kinks, rust pitting or damaged ends. Worn cables should never be patched or reused, since a failed cable can drop the stand and the hunter. Consult the stand maker’s guidance on inspection intervals.

Can I replace only one cable, or should I replace both?

Replacing both cables together is the safer approach, since a new cable paired with an old one can load unevenly. Matched pairs, like this two-pack, make that simpler. Always test the stand at low height after installation before climbing. We also found Hawk Hang-On Tree Stand Review: Features and Performance useful on this point.

Final Verdict

For hunters who need dependable replacement cables with a rust-resistant finish and a clear load rating, this two-pack is a sensible pick once fit is confirmed. Measure first, then compare the alternatives if your stand needs a different length or brand.

View on Amazon

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our hunting guides, checking product details against manufacturer specifications and owner feedback.