Updated November 2026

A Bushnell rangefinder for hunting gives you a reliable yardage reading to the animal or the spot you plan to shoot, so you can set your sight picture and hold with confidence. This guide walks through setup, ranging technique, and the field factors that most often throw off a reading. Work through these steps before opening day and you will range faster and with fewer surprises.

Set Up the Rangefinder Before the Season

Start by confirming the battery is fresh and the display is set to yards, since many hunters range in yards for bow and rifle work. Check the manufacturer’s manual for the mode menu and turn on the modes you actually plan to use, such as scan or angle compensation. If your unit is a golf-style model, make sure the hunting-appropriate settings are active. For battery type and replacement, see Battery for Bushnell Rangefinder: Which Type to Buy and How to Replace It.

Range Targets Accurately in the Field

Hold the unit steady with both hands against your face, and press the button to fire at the closest solid edge of the animal or the object you intend to hit. Brush, grass tips and branches can return a false reading, so pick a clear target behind them. Range at least twice: a reading that changes sharply between presses usually means something is in the beam.

  1. Confirm the display is in yards and the battery is charged.
  2. Aim at the target’s edge or a distinct object at the same distance as the animal.
  3. Range two or three times and note the consistent value.
  4. Recheck the reading if the animal moves to a new spot.

Account for Slope and Angle

Shooting uphill or downhill changes the horizontal distance you need for your sight setting, even when the laser distance stays the same. If your model includes an angle or slope mode, use it when the shot is steeper than roughly 20 degrees. Some hunters use the reading as the line-of-sight distance and then apply their ballistic chart for angle, so check your load’s data before relying on either method. For models with specific slope features, see Bushnell A1 Slope Rangefinder Review: Is It Worth It? and Bushnell Tour V6 Rangefinder: Setup, Slope Mode and Hunting Tips.

Choose the Right Unit for Your Hunting Style

Bow hunters often need a unit that reads close targets quickly and handles short distances well, while rifle hunters on open country benefit from longer range and stable scanning. Bushnell offers several models across these uses, and the right one depends on how far you typically shoot and how much brush surrounds your stand. Compare options such as Bushnell Scout 1000 Arc Rangefinder: How to Use It for Hunting (Setup and Tips) and Bushnell Fusion X Rangefinder Binoculars: Setup, Use and Tips for Hunters to match features to your hunts.

Common Mistakes to Avoid

  • Ranging through brush, grass or fence wire instead of the target.
  • Trusting a single reading without a second confirmation.
  • Ignoring slope on steep stand sites and ridge shots.
  • Letting the battery run low before the hunt.
  • Forgetting to practice ranging at known distances on the range.

A sturdy harness or strap keeps the unit ready on your chest or pack, so you can range without fumbling. View on Amazon

Spare batteries matched to your model prevent a dead unit at the critical moment. View on Amazon

FAQ

Can a Bushnell rangefinder read through brush?

It can return a reading from the nearest object in the beam, so brush often gives a false short distance. Choose a clear target behind the brush or move to a spot with an open line of sight.

Do I need slope mode for deer hunting?

Slope mode matters most on steep terrain, such as high stands on hillsides. On flat ground, the standard distance reading is usually sufficient.

How do I know the rangefinder is accurate?

Test it on the range at marked distances and compare readings several times. Check the manufacturer’s stated accuracy and consult the manual for calibration steps.

Conclusion

A Bushnell rangefinder for hunting is most useful when you set it up in advance, range clear targets, and account for slope. Practice these steps during the off-season so they feel automatic when a buck steps into view. For model-specific setup, check the manufacturer’s manual and, if you have questions about your equipment, consult a knowledgeable local outfitter or the manufacturer’s support team.

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our hunting guides, checking product details against manufacturer specifications and owner feedback.