Updated November 2026
The Bushnell Tour V6 golf rangefinder gives you accurate distance to the flag, the trees, or the bunker in a fraction of a second. This guide walks you through the first-time setup, the core ranging modes, and the habits that keep your readings consistent. Once you finish, you will know how to get reliable yardage on every shot.
Set Up the Bushnell Tour V6 Before Your Round
Start by installing the battery and checking the display before you reach the first tee. Most owners find it easier to confirm settings at home than to troubleshoot on the course.
Shopping for one? See our guide: 5 Best Rangefinder Golfs with Slope Picks for Accurate Yardage (2026).
- Open the battery compartment and insert the battery with the correct polarity, then close the cover fully.
- Press the power button and confirm the display shows full brightness and no error codes.
- Set your preferred unit (yards or meters) and confirm the measurement mode you plan to use.
- Check the focus by looking through the eyepiece at a distant target and adjusting the diopter ring until the display is sharp.
If the display looks dim or the unit won’t power on, the battery is the most likely cause. For battery type and replacement details, see Battery for Bushnell Rangefinder: Which Type to Buy and How to Replace It.
Use Pin Lock and Scan Mode for Accurate Yardage
Pin lock is the feature most golfers use for flag distance. It locks onto the flag and ignores the background, so the reading stays on the pin even when trees or grass sit behind it.
Ranging the Flag
Aim the center of the reticle at the flag stick and press the ranging button. Keep the unit steady and wait for the confirmation before you read the number. Pin lock typically prioritizes the flag over closer or farther objects, which helps when the pin sits in front of a tree line.
Scan Mode for Moving Targets
Scan mode provides continuous readings as you sweep across the course. It suits walking the fairway to track changing distance, but it is less precise than a single locked reading.
Turn On Slope Mode When Elevation Changes
Slope mode adjusts the displayed distance to account for uphill or downhill shots. Manufacturers typically describe this as the “plays like” distance, which is the number you should use for club selection.
Use slope mode when the elevation difference between you and the target is noticeable. On flat ground, the plays-like number and the true distance will match closely, so leaving it on rarely hurts. Owners often report that practicing slope readings on a range with known elevation changes builds confidence quickly.
Practice Your Ranging Routine
Consistency matters more than any single feature. Build a short routine you repeat on every shot:
- Stand in a stable position and hold the unit at eye level.
- Range the flag first, then range any hazard that matters for the shot.
- Check that the reading makes sense against the yardage markers on the course.
- Record the number on your scorecard or in your notes so you can compare later.
Common Mistakes
- Ranging a tree or a shadow edge instead of the flag, which produces a reading that is too long or too short.
- Leaving slope mode on when the shot is flat, which can add confusion to your club choice.
- Shaking the unit while ranging, which can delay the lock and cause a wrong reading.
- Using an old or low battery, which can dim the display and make the number harder to read in bright sun.
- Assuming the reading is exact for every lie without checking the flag position on the green.
Recommended Gear
- Replacement battery for the Bushnell Tour V6: Keeping a spare on hand prevents a dead unit mid-round. View on Amazon
- Rangefinder carrying case: A padded case protects the optics and keeps the unit ready in your bag. View on Amazon
- Rangefinder neck strap: A strap keeps the unit within reach so you can range quickly between shots. View on Amazon
FAQ
Does the Bushnell Tour V6 work in rain?
Many owners use it in light rain, but check the official product documentation for its specific water resistance rating before heavy weather. Dry the lenses after use to avoid residue.
How do I know if pin lock is on?
Check the display indicator for the flag or pin mode when you power on or switch modes. Confirm it by ranging a flag and comparing the reading with the markers on the course.
Can I use the Tour V6 for hunting?
The Tour V6 is designed for golf, so it is not a hunting rangefinder. For hunting-specific models and setup, check the hunting rangefinder guides on this site.
Conclusion
With the setup complete, pin lock and slope mode become simple tools rather than guesses. Build a steady ranging routine and you will read yardage faster and with fewer mistakes. Keep a spare battery in your bag so the unit is ready when you need it.

