Updated November 2026

The bushnell tour v6 laser rangefinder gives hunters a fast, reliable way to read distance to a target, and with a few setup steps you can trust its numbers in the field. This guide covers the basics: preparing the unit, taking clean readings, using angle compensation, and avoiding the mistakes that throw off yardage. Read the owner’s manual for the full feature list, since menu options and firmware details can differ by production run.

Prepare the Rangefinder Before You Head Out

Set the rangefinder up at home so you are not learning the menus in the dark. Install a fresh battery, confirm the display is readable at low light, and check the eyepiece focus. Practice a few readings on fixed objects such as a fence post or a building corner so you know what a confirmed reading looks like. For another angle, check out Bushnell 1000 Arc Rangefinder: Setup, Use and Tips for Hunters.

Shopping for one? See our guide: 5 Best Rangefinder Golfs with Slope Picks for Accurate Yardage (2026).

  1. Insert a fresh battery and power the unit on.
  2. Adjust the diopter so the display text and reticle are sharp to your eye.
  3. Confirm the units are set to yards (or meters) to match your planning.
  4. Check the mode settings, including whether angle compensation is on.
  5. Store the unit in a case or pocket where it will stay dry and stable.

Take Accurate Readings in the Field

Steady the rangefinder with both hands, rest your elbows on your body or a support, and aim at the target you want to range. Press the measure button and hold still until the reading confirms. Movement during the reading is the most common cause of a bad number, so brace yourself before you press.

Pay attention to what sits behind the animal. Brush, branches and tall grass can return a closer reading than the target itself. If you are unsure, take two or three readings and compare them. A consistent set of numbers is more trustworthy than a single shot.

Use Angle Compensation on Steep Shots

Angle compensation matters when you shoot up or down a hill, since the line-of-sight distance is longer than the horizontal distance that governs bullet drop and arrow trajectory. Enable the angle mode, aim at the target, and take the reading. The unit will report the horizontal distance, which is the number you should use for holdover or sight settings.

Situation Mode to use What to check
Level ground, flat shot Standard distance Reading holds steady
Steep uphill or downhill Angle compensation on Horizontal number used for aim
Target behind brush Standard, repeat readings Compare several values

For a deeper look at how the angle and slope functions relate to the setup, see Bushnell Tour V6 Shift Rangefinder: Setup, Slope Mode and Tips. If you want the underlying principles of how the beam measures distance, How Does a Laser Rangefinder Work: Step-by-Step Guide for Hunters explains it in plain terms.

Plan Your Gear and Carry Spare Power

Dead batteries are a frequent cause of trouble on a long hunt. Carry a spare battery of the type the manufacturer specifies and check it before each season. Cold weather drains batteries faster, so keep the spare inside a pocket close to your body rather than in the pack. A related read: Bushnell Tour V6 Golf Rangefinder: Setup, Use and Key Tips.

If you also use other rangefinders, keep their batteries and manuals organized so you do not mix up battery types. CR2 Battery for Rangefinder: Type, Replacement Steps and Tips (2026) covers how to identify and swap the correct cell.

Common Mistakes

  • Ranging through glass, such as a window or a blind opening, which can produce false readings.
  • Pressing the button while moving or breathing hard, causing unsteady numbers.
  • Ignoring angle compensation on steep terrain and using the line-of-sight distance for aim.
  • Trusting one reading instead of taking two or three to confirm.
  • Forgetting to check the battery before the hunt begins.

A sturdy carry case protects the optics from knocks and keeps the lens clean while you move through brush. View on Amazon

A lanyard or harness keeps the unit within reach when you need a quick reading and reduces the chance of dropping it from a tree stand. View on Amazon

Spare CR2-type batteries let you swap power in the field without interrupting your plan. View on Amazon

FAQ

Does the bushnell tour v6 laser rangefinder work in the rain?

Many hunting rangefinders are rated for wet conditions, but you should confirm the water resistance rating in the manufacturer’s specifications. Wipe the lens dry after exposure and avoid letting water sit on the optics.

Why does my reading change every time I press the button?

Small hand movement, a target edge that is not clearly defined, or vegetation in the beam path can all shift the number. Brace yourself, aim at a solid part of the target, and take several readings.

Should I always use angle compensation?

Use it when you are shooting noticeably up or down a slope. On flat ground the standard reading is usually all you need, but check the manual for how the mode behaves on your unit.

Conclusion

With a little practice at home, the bushnell tour v6 laser rangefinder becomes a dependable tool for judging distance in the field. Prepare the battery and settings before the hunt, take steady repeat readings, and use angle compensation on steep shots. Consult the owner’s manual and a qualified guide for specifics on your setup and local hunting rules.

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our hunting guides, checking product details against manufacturer specifications and owner feedback.