Updated November 2026

The bushnell tour v6 shift laser rangefinder gives you quick, accurate distances and, with slope mode switched on, adjusted yardage for uphill and downhill shots. This guide walks through the setup, the modes that matter most for hunters, and how to check your readings before the animal shows up. Follow the steps and you will know exactly what the unit is telling you when it counts.

Set Up the Rangefinder Before the Hunt

Install the battery and confirm the unit powers on before you leave the truck. Check the battery type printed in the manual or on the battery compartment, and carry a spare if you plan a full day in the stand. If you need help choosing a replacement, see Battery for Bushnell Rangefinder: Which Type to Buy and How to Replace It.

Shopping for one? See our guide: Bushnell A1 Slope Rangefinder Review: Is It Worth It?.

Next, adjust the diopter so the display and the reticle look sharp through the eyepiece. Do this for each eye separately, using a distant target, and then lock in the setting so you do not have to repeat it.

Use Slope Mode for Angled Shots

Slope mode is the feature that separates this model from a basic ranger. When you range a target above or below you, the unit can report a line-of-sight distance and an adjusted horizontal distance, which is the number you should use to choose your aiming point. Practice with both readings so you know which one your sight or your hold depends on.

Steep angles matter most. A target 30 yards away at a steep downhill angle can have a horizontal distance noticeably shorter than the line-of-sight figure, and that difference changes where your arrow or bullet lands. For a broader look at how slope affects range, read Bushnell Tour V6 Shift Rangefinder: Setup, Slope Mode and Tips.

Range Targets Accurately in the Field

  1. Pick a landmark, such as a stump, tree trunk or rock, at the same distance as the animal’s likely position.
  2. Hold the unit steady with both hands against your face, and range the landmark twice. Two readings within a yard of each other are a good sign.
  3. Range the edge of the animal’s body that you intend to aim for, not its center mass in the brush.
  4. Note the reading, then confirm the angle symbol on the display if slope mode is active.
  5. Turn the unit off when you are done to conserve battery.

Shift-style rangefinders are built to pick out a target through brush and at longer range, but they still need a clear line to the target. Range from the stand or blind at the spot you expect to shoot, and keep a mental note of the reading for landmarks around you.

Quick Reference for Hunters

Task What to Check
Before the hunt Battery power, diopter focus, mode settings
Angled shots Slope mode on, line-of-sight vs. adjusted reading
Landmarks Range at least three in your shooting lanes
Storage Keep the unit cool, dry and out of direct sun

Common Mistakes and Tips

  • Ranging through glass or a scope cover can produce false readings. Shoot through open air when possible.
  • Forgetting to turn slope mode on or off leads to confusing yardage. Check the display before each shot.
  • Trusting a single reading. Range twice and compare.
  • Ignoring the rangefinder’s minimum and maximum range. Know its limits before the season opens.
  • Leaving the unit on the stand all day. Cold, heat and moisture drain batteries and affect the lens.
  • Replacement batteries help you avoid a dead unit mid-hunt. Keep a spare in a pocket rather than the pack. View on Amazon
  • A padded rangefinder case protects the lens and keeps the unit out of the weather when you walk in. View on Amazon
  • A neck strap or lanyard keeps the unit ready in your hand so you do not drop it from the stand. View on Amazon

FAQ

Does the bushnell tour v6 shift laser rangefinder work through brush?

It is designed to pick out targets through light brush, but dense cover can return the nearest object instead of your intended target. Range a clear opening or a nearby landmark when cover is thick. Bushnell Tour V6 Shift Golf Laser Rangefinder: Setup and Use Guide goes further into this.

How do I know if slope mode is on?

Check the display after you turn the unit on. An angle indicator appears when slope mode is active, and the readings change accordingly. Consult the manual for the exact icon on your model.

Should I consult a professional about hunting safety?

For questions about firearm or archery safety, hunting regulations, or shot placement, consult a licensed instructor or your state wildlife agency. Accurate yardage supports good decisions but does not replace proper training.

Conclusion

Set the unit up at home, learn how slope mode changes your readings, and practice ranging landmarks in your shooting lanes. Verify each reading before the animal arrives. With those habits in place, the bushnell tour v6 shift laser rangefinder becomes a reliable tool for every shot you take.

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our hunting guides, checking product details against manufacturer specifications and owner feedback.