Updated November 2026
The Bushnell Tour V6 Shift golf laser rangefinder gives you accurate distances to flags, hazards and targets, along with a slope-adjusted yardage in its shift mode. This guide walks you through the first-time setup, the basic measuring steps and the slope and pin-lock features so you can read the numbers with confidence before your next round.
Before You Start: Setup and Battery Check
Install the battery before anything else. Manufacturers typically specify a coin-cell lithium battery for this model, so check the battery compartment and the manual for the exact type. Confirm the unit powers on and that the display shows clearly in both bright sun and shade. For battery selection details, see Battery for Bushnell Rangefinder: Which Type to Buy and How to Replace It.
Shopping for one? See our guide: 5 Best Rangefinder Golfs with Slope Picks for Accurate Yardage (2026).
- Insert the battery with the correct polarity and close the cover.
- Press the power button and wait for the startup display.
- Set your units (yards or meters) in the settings menu.
- Choose your slope setting (on or off) based on how you play.
- Look through the eyepiece and adjust the diopter so the display is sharp.
How to Measure Distance with the V6 Shift
Aim the rangefinder at your target and press the measure button once. Hold the unit steady, since small movements change the reading at longer distances. The display shows the yardage to the target, and a single press gives a result within a moment. For another angle, check out Bushnell Tour V6 Shift Laser Rangefinder: Setup and Hunting Tips.
Using Pin Lock
Pin lock helps you lock onto the flag even when the background is busy with trees or a bunker. Aim at the flag, and the unit’s lock feature focuses on the pin rather than the nearer or farther objects. Practice this on a few known distances near the clubhouse to confirm the behavior you see.
Using Slope Mode and Shift Mode Correctly
Slope mode calculates an adjusted distance based on the elevation change between you and the target. Owners often report that the adjusted number is the one to use for club selection on hilly courses, while the flat-line distance is what you use on level ground. Shift mode gives you a readout that accounts for the slope, so you can compare the two numbers on the display.
Turn slope mode on when the target sits noticeably above or below you. Leave it off when you want a straight-line reading. Check the display’s slope indicator to confirm which mode is active before you hit.
Practical Checklist for the Course
- Fresh battery installed and tested before the round
- Units set to yards or meters as you prefer
- Slope mode turned on or off to match the course
- Pin lock tested on a known target
- Unit kept in a case or pocket to protect the lens
Common Mistakes to Avoid
- Measuring to the wrong object, such as a tree behind the flag. Aim directly at the pin.
- Forgetting to switch slope mode on or off, which changes the number you read.
- Ignoring a weak battery. A dim display can produce unreliable readings.
- Shaking the unit during the measurement. Brace your elbows against your body.
- Skipping practice before a tournament or important round.
Recommended gear
A rangefinder case protects the optics from drops and rain during a walk-and-play round. View on Amazon
A spare coin-cell battery keeps you from losing the unit mid-round if the power dies. View on Amazon
FAQ
Does the Tour V6 Shift work in rain?
Owners generally report it handles light rain, but you should wipe the lens dry and keep the unit covered between shots. Check the manufacturer’s water-resistance rating in the manual for specifics. For a deeper look, Caddytek Golf Laser Rangefinder CaddyView V3 Slope: Setup and Use Guide covers this in detail.
What is the difference between slope and shift readings?
Slope mode adjusts the distance for elevation change, while shift mode shows the adjusted reading alongside the flat distance. Use the number that matches the club selection you need for the shot. You may also like Bushnell Tour V6 Golf Rangefinder: Setup, Use and Key Tips.
Can I use the rangefinder for hunting?
The Tour V6 Shift is built for golf, so for hunting you should look at a rangefinder designed for that purpose. See Bushnell Tour V6 Shift Laser Rangefinder: Setup and Hunting Tips for how the model is used in the field.
Conclusion
With a charged battery, correct units and the right slope setting, the Bushnell Tour V6 Shift gives you reliable yardage on the course. Practice pin lock and slope mode on familiar holes before your next round. Check the official Bushnell site for current specifications and support details.

